Walksnail Avatar HD Kit V2 – 32GB

Walksnail Avatar HD Kit V2 with 32GB of built-in DVR storage and Gyroflow support.
This set is designed for the Walksnail Avatar digital FPV system.

Not sure what to buy? Check out our Walksnail Avatar VTX and Camera comparison 2024 article!

This Walksnail Avatar HD Kit V2 consist of a Walksnail Avatar Digital Video Transmitter, a Walksnail Avatar V2 camera and one antenna.

Step into the world of Digital FPV with VTX and camera bundle. Enjoy razor-sharp live FPV images when putting this kit on your Remote Control model of choice. Combine this kit with a stand alone video receiver or the Walksnail Avatar Goggle X with built-in VRX to enjoy the thrill of digital Full HD FPV.

The Walksnail Avatar HD Kit V2 comes with built-in DVR storage of 32GB to record your flight footage directly from the camera without the need for an additional DVR or action camera. Save weight, space and money.

The Walksnail Avatar HD Kit V2 fully supports GyroFlow, the open-source and very advanced video stabilization tool for cinematography, drone videography and much more. Whether you are flying in very turbulent conditions or are doing some speed manouvre, GyroFlow will minimalize any vibrations or motion blur. Stabilize your footage to get beautiful footage that’s pleasant to watch!

Walksnail Avatar HD Kit V2: feature overview

Highlights of the Walksnail Avatar HD Kit V2

1080P 120fps compatibility | 22ms low latency | Ranging Mode | 4KM range | Light weight design | FOV160° | Built-in 32G storage | Gyroflow support | GPS anti-jamming | 6V-25.2V | The only native 4:3 high-definition sensor in the FPV industry

Avatar V2 camera

The Avatar V2 Camera that comes with the Walksnail Avatar HD Kit V2 features a native 4:3 4Mp 1/3.2-Inch sensor with 2K pixels. Support for gyroflow and 120FPS. The sensor gives a better image quality than it’s predecessor and the native 4:3 aspect ratio allows you to capture more of the surrounding scenery, specially in the vertical field of view.

The resolution is 1080P HD and the camera features a F/2.0 Aperture with a FOV of 160 degrees.

video transmitter

The VTX can be installed with 20mm x 20mm or 25mm x 25mm mounting holes to fit as many frames as possible. The PCB and shell of the VTX is upgraded to improve the quality of the video transmitter and to protect the pcb better during use.

The installation place of the single antenna is updated to better protect the VTX. The frequency binding button is placed somewhere else to make operation more easy. A spare pad is added to provide two power connection modes.

To mitigate problems with Back EMF as good as possible, enhanced TVS protection is installed on the PCB. 6S input voltage is now supported.

With a wide input voltage the range of 6V to 25.2V, the VTX delivers unmatched stability.

Built-in DVR

The Avatar VTX comes with 32g built-in storage.

You can record the camera image in 1080p or 720p. Thanks to the 32GB storage, you will have enough memory to capture some stunning footage!

High frame rate support

Support for both high frame rate and standard frame rate mode. In high frame rate mode, there’s an average latency of 22ms.

Dimensions and Connections

What you get when ordering the Walksnail Avatar HD Kit V2

• 1x Walksnail Avatar V2 camera
• 1x Walksnail Avatar V2 module (VTX)
• 1x Walksnail Avatar V2 antenna
• 1x USB transfer extension cable
• 1x 4 Pin silicone cable
• 8x M2*4mm screws
• 4x M2*5mm screws
• 4x M2*6mm screws
• 4x M2*14mm screws
• 4x M2*5*0.5mm gasket