Walksnail Avatar HD Kit V2 (Dual Antenna)
Walksnail Avatar HD Kit V2 with Dual Antenna’s, 32GB of built-in DVR storage, Gyroflow support and dual antenna‘s for better reception and signal penetration.
This set is designed for the Walksnail Avatar digital FPV system.
Not sure what to buy? Check out our Walksnail Avatar VTX and Camera comparison 2024 article where we discuss when the Walksnail Avatar HD Kit V2 (Dual Antenna) is a good pick !
Step into the world of Digital FPV with VTX and camera bundle. Enjoy razor-sharp live FPV images when putting this kit on your rc model of choice. Combine this kit with a stand alone video receiver, the Walksnail Avatar Goggle X or the Walksnail Goggle L
The Walksnail Avatar HD Kit V2 (Dual Antenna) comes with built-in DVR storage of 32GB to record your flight footage directly from the camera without the need for an additional DVR or action camera. Save weight, space and money.
This Walksnail Avatar HD Kit V2 (Dual Antenna) kit fully supports GyroFlow, the open-source and very advanced video stabilization tool for cinematography, drone videography and much more. Whether you are flying in very turbulent conditions or are doing some speed manouvre, GyroFlow will minimalize any vibrations or motion blur. Stabilize your footage to get beautiful footage that’s pleasant to watch!
Walksnail Avatar HD Kit V2 (Dual Antenna): feature overview
Highlights of the Walksnail Avatar HD Kit V2 (Dual Antenna)
Dual antennas | Compatible 4K | 1080P 120fps compatibility | 22ms low latency | Ranging Mode | 4KM range | Light weight design | FOV160° | Built-in 32G storage,
Support Gyroflow | 6V-25.2V | The only native 4:3 high-definition sensor in the FPV industry
Avatar V2 camera
The Avatar V2 Camera features a native 4:3 4Mp 1/3.2-Inch sensor with 2K pixels. The sensor gives a better image quality than it’s predecessor and the native 4:3 aspect ratio allows you to capture more of the surrounding scenery, specially in the vertical field of view.
video transmitter
The VTX can be installed with 20mm x 20mm or 25mm x 25mm mounting holes to fit as many frames as possible. The PCB and shell of the VTX is upgraded to improve the quality of the video transmitter and to protect the pcb better during use.
The installation place of the dual antenna’s is updated to better protect the VTX. The frequency binding button is placed somewhere else to make operation more easy. A spare pad is added to provide two power connection modes.
Built-in DVR
The Avatar VTX comes with 32g built-in storage.
You can record the camera image in 1080p or 720p. Thanks to the 32GB storage, you will have enough memory to capture some stunning footage!
High frame rate support
Support for both high frame rate and standard frame rate mode. In high frame rate mode, there’s an average latency of 22ms.
Dual Antennas
The dual antennas provide a more stable and powerful signal. The antennas are upgraded to give even better performance. This results in a more stable frequency band and a better link.
Specifications of the Walksnail Avatar HD Kit V2 (Dual Antenna) kit
Walksnail Avatar V2 camera
- Model: Walksnail Avatar V2 camera
- Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
- Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
- Aspect Ratio 4:3 native / 16:9
- Lens: 2.1mm
- FOV: 160°
- Aperture: F2.0
- Shutter: Rolling shutter
- Min.Illumination: 0.001Lux
- Weight: 7.2g
- Dimensions: 19*19*22mm
- Coaxial Cable Length: 140mm
- Gyroflow: Only 32G VTX Supported
Walksnail Avatar V2 Antenna’s
- Polarization: LHCP
- Frequency range: 5600MHz-6000MHz
- Gain: 1.9dBi
- VSWR: ≤1.5
- Input Impedance: 50Ω
- Interface: IPEX-1
- Size: R15 X 45mm(without cable)
- Weight: 2g
Walksnail Avatar VTX (Video Transmitter)
- Model: Avatar V2 Module(Dual Antenna)
- Communication Frequency: 5.725-5.850GHz
- Transmitter Power (EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
- I/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
- Mounting Holes: 25.5*25.5mm; 20*20mm
- Dimensions: 33.5*33.5*10.5mm
- Storage: 32GB
- Recording: 1080p/720p
- Weight: 15.4g
- Operating Temperature: -20-40℃
- Channels: 8
- Power Input: 6V-25.2V
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
- OSD Canvas mode
- Latency: Average delay 22ms
- Antenna: 2 IPEX connectors
What you get when ordering the Walksnail Avatar HD Kit V2 (Dual Antenna)
- 1x Walksnail Avatar V2 camera
- 1x Walksnail Avatar V2 module(Dual Antenna) (VTX)
- 2x Walksnail Avatar V2 antenna
- 1x USB transfer extension cable
- 1x 4 Pin silicone cable
- 8x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
- 4x M2*14mm screws
- 4x M2*5*0.5mm gasket
Reviews
There are no reviews yet.