Sale!

EP1 ExpressLRS Nano Receiver 2.4GHz (ELRS)

EP1 ExpressLRS Nano Receiver 2.4GHz (ELRS) [DISCONTINUED]

Name: EP1 ExpressLRS Nano Receiver 2.4GHz (ELRS) [DISCONTINUED] - TekRC EU
SKU: HP157-RX-EP1
Price: 11.56 EUR
Availability: OutOfStock

Original price was: € 17.99.Current price is: € 13.99. Incl. VAT

This product is discontinued.

See updated version

Out of stock

Official RadioMaster EU repair & service center
Directly shipped from The Netherlands
Not as expected? Return your product within 14 days and get a full refund
Dutch/English/German/French speaking customer support
Buy directly at us and receive software & hardware support

SKU: HP157-RX-EP1 Categories: ExpressLRS, Receivers Tags: ExpressLRS, Zorro

EP1 ExpressLRS Nano Receiver 2.4GHz (ELRS)

The EP1 ExpressLRS Nano Receiver 2.4GHz (ELRS)receiver is an open source program based on ExpressLRS.

The EP1 and EP2 receivers are designed on the basis of the opensource PP receiver by Jye Smith form the ExpressLRS development team.

The main hardware architecture of the PP receiver is a STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.

On the basis of the PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU. The ESP8285 MCU features built-in wifi. Thanks to this it’s possible to upgrade firmware by WiFi !

Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. The receivers are also very suitable for Tiny whoop because of the ultra light and Nano size.

Specifications

Item Name: EP1 Nano Receiver
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
Omnidirectional antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.42g(without antenna)
Dimension: 10mm*10mm*3mm
Peak gain: 2.23dB
Manual: EP1 Manual

Other Expresslrs items that you may like...

Free / reduced shipping

Quick View

Out of stock

RadioMaster Zorro

RadioMaster Zorro MAX

Hot!

RadioMaster RP3 ExpressLRS receiver dual antenna

Quick View

ExpressLRS

RadioMaster RP3 ExpressLRS Nano Receiver V2 (2.4GHz)

€ 26.95 Incl. VAT

RadioMaster RP2 ExpressLRS Nano Receiver

Quick View

ExpressLRS

RadioMaster RP2 ExpressLRS Nano Receiver V2 (2.4GHz)

€ 22.79 Incl. VAT

Quick View

ExpressLRS

RadioMaster RP1 ExpressLRS Nano Receiver V2 (2.4GHz)

€ 22.79 Incl. VAT

Quick View

Zorro

RadioMaster Zorro Carry Case

€ 25.99 Incl. VAT

Quick View

Transmitter Accessories

RadioMaster Zorro Battery 900mAh 3.7v Li-ion 18350 Cells (2pc)

€ 10.79 Incl. VAT

Sale!

Quick View

RadioMaster Zorro

Rated 5.00 out of 5

€ 119.99 – € 179.95 Incl. VAT

Notes

Since the Official Stable version of ELRS firmware has not been released yet, currently our EP1 and EP2 receivers are pre-loaded with Beta firmware. You can upgrade the official firmware when Official perfect target available.

More details about ExpressLRS: https://github.com/ExpressLRS/ExpressLRS

Bind procedure:

– Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode

– Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.

– Receiver LED status meanings:

PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module

EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1 from the web browser(password: expresslrs)