The RadioMaster Boxer Transparent edition comes with an impressive feature set and a very interesting form factor. This rc radio is an ideal choice for pilots who like to travel light, while not giving up on features. The RadioMaster Boxer Transparent Version comes with full size v4 hall gimbals, the famous RadioMaster button layout, a full size JR bay, internal ELRS rf module and a travel case, gimbal LED kit & neckstrap.
The RadioMaster Boxer Transparent Edition is hardwarewise exactly the same as the regular RadioMaster Boxer, but now in a very slick looking transparent casing.
Extra included with the RadioMaster Boxer Transparent version:
- White Gimbal LED set (included, not installed)
- RadioMaster Neckstrap
This version is for now only available with an internal ELRS module and the V4 Hall gimbals.
Don't forget your Boxer accessories
Special Transparent edition
Cool Ice looking transparent edition of the RadioMaster Boxer Transparent edition makes sure you stand out of the crowd.
Modern and powerful processor
The Boxer features a STM32VGT6 processor with 1MB of RAM. This processor and RAM configuration is future proof.
FULLY open-tx and edgetx compatible
The RadioMaster Boxer Transparent version is fully supported by OpenTX and EdgeTX. Enjoy the power of those awesome OpenSource projects on your Boxer transmitter.
UP to 20 hour operation time
Combine the RadioMaster Boxer with our official 2S 6200mAh Li-Po pack to get a maximum operation time of 20 hours on a single charge.*
low-profile switches & removable antenna
on the shoulders of the RadioMaster Boxer Transparent, you find 2 new low-profile switches. Thanks to the removable antenna, you can now transport your transmitter way more easily.
External module bay
Attach external modules to your Boxer Transparent. Use Crossfire, ELRS and other compatible modules to extent the RF capabilities of your transmitter.
EU LBT Version remark
We only sell the EU-LBT compliant version of RadioMaster products to meet EU legislation. Hardware is the same between the EU LBT and FCC version.
In particular this means that:
- ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output)
The RadioMaster Boxer Transparent version comes pre-flashed with EdgeTX.
EdgeTX is a cutting edge open-source firmware project for R/C radio’s, that enables you to do everything you could ever dream of with your rc transmitter.
EdgeTX and Opentx
OpenTX and EdgeTX are the leading OpenSource software projects to run on RC transmitters. OpenTX and EdgeTX are driving all our RadioMaster products.
Both of these transmitter operating systems gives you full controll about all aspects of your transmitter. You are fully in control.
Set up multiple models, attach switches to custom functions, let the software take custom actions based on telemetry values.
Set up RF power output with LUA scripts. Adjust your Betaflight or INAV settings with Lua Scripts. And many, many more features!
With OpenTX and EdgeTX, your imagination is the only limitation.
RadioMaster Boxer: feature overview
Full Sized V4 Hall Gimbals
All RadioMaster Boxer Transparent versions comes with V4.0 Hall gimbals.
The famous V4.0 Hall effect senor gimbal, as found on the TX16S serie, is also installed on the RadioMaster Boxer Transparent Version. The V4.0 Hall effect sensor gimbal is fully adjustable from the outside, there’s no need to open the case to adjust the gimbals to your preferences.
Optionally you can buy the AG01 premium gimbals to replace the stock gimbals on your RadioMaster Boxer for an even more precise and smooth experience. We offer the AG01 in standard black and in AG01 new color versions.
Standardize button layout
Thanks to the standardized RadioMaster Button layout, you will never be in doubt where each button is located. All RadioMaster transmitters features this same button layout to make swapping transmitters easy!
New Low-Profile switches
The RadioMaster Boxer Transparent version comes with two low profile shoulder buttons. On the right shoulder of the rc transmitter you find a flat momentary switch (SF). On the left shoulder of the rc radio you find a flat latching switch (SE).
In combination with the removable antenna, traveling with the RadioMaster is a breeze.
Included with every RadioMaster Boxer Transparent version
Every RadioMaster Boxer Transparent Edition comes with a carry case & gimbal protector, to offer good protection while traveling with your RC transmitter. Extra included over the regular RadioMaster Boxer are a LED gimbal kit in white & a RadioMaster NeckStrap
LED Gimbal Light
Every RadioMaster Boxer Transparent version includes a set of white color LED gimbal light. They are not factory installed so that you can decide if you want to use them or not.
The LED Gimbal light kit gives your transparent edition Boxer an awesome look.
SD Card & Charging
All transmitters comes with a pre-loaded SD card that fits in the redesigned sd card slot. The new charging controller supports quick charging 3.0 up to a maximum of 2.0A .
You can use your RadioMaster Boxer RC transmitter up to 20 hours on a single charge with the optionally available 2S 6200 mAh Li-Po battery.*
* Battery not included, optionally available
* Tested under ideal circumstances
T Shape antenna
Included with every transmitter is a removable T-Shape Antenna. This antenna is strong, rigid but still adjustable.
The RadioMaster Boxer Transparent version is very compact, while still featuring full size gimbals and excellent ergonomics. It’s a blast to travel with your Boxer.
Instead of a traditional plastic, steel or aluminum handle, RadioMaster picked a Fabric handle for the RadioMaster Boxer as the first in the industry.
The Fabric handle makes transportation more convenient because the transmitter packs smaller, while still providing a easy way to hold your RC radio.
- Special transparent version radio with white Gimbal LED set and RadioMaster Neck Strap included
- You can DIY your personalized and unique radio anytime
- Available with built-in ExpressLRS RF modules
- Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM
- Preinstalled EdgeTX firmware
- Internal ELRS module capable of 1,000Hz refresh rate
- Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
- QC3.0 fast charging support 2.0A MAX
- Compact design with excellent ergonomics
- New low-profile latching SE switch and momentary SF switch
- Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included)
- Full sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
- Standard JR module compartment
- Internal module cooling fan built in (ELRS version)
- RadioMaster standardized button layout
- Versatile 6-position switch for flight mode access
- Adjustable and Removable T-shape Antenna
- Industry first fabric handle for improved portability
- Changeable, ergonomic grips
- Redesigned SD card slot with pre-loaded SD card included
- External module power slots in battery cover
- RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move
- Item: BOXER Radio Transparent Version
- Size: 235*178*77mm
- Weight: 532.5g
- Frequency: 2.400GHz-2.480GHz
- Internal RF: ELRS 2.4GHz
- Supported protocols: Module dependent
- Transmitting Power: ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
- Cooling fan: Built in (ELRS version)
- Voltage Range: 6.6-8.4V DC
- Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
- Channels: Max 16 channels (Receiver dependent)
- Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
- Display: 128*64 Monochrome LCD display
- Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
- External module: JR / FrSKY / Crossfire compatible
- Upgrade Method: USB / SD card & EdgeTX Companion PC software
- BONUS: White Gimbal LED set included but not installed
- BONUS: Radiomaster neck strap
What you get when ordering the RadioMaster Boxer
- 1 * BOXER Radio ( EU-LBT) in chosen configuration (CC2400/4in1/ELRS)
- 1 * Signature Carry Case
- 1 * T Antenna
- 1 * USB-C Cable
- 1 * Gimbal Protector
- 1 * 1.5mm Allen Key
- 2 * M4*4 Screws
- 4 * Low Tension Springs
- 1 * 18650 Battery Tray
- 1 * Stickers
- 1 * Manual